• Ingresar
2 Year Warranty

ADAM-6024-D 6AI/2AO/2DI/2DO IoT Modbus/SNMP/MQTT Ethernet Remote I/O

  • 6ch analog input/2ch analog output/2ch digital input/2ch digital output
  • Protocols:MQTT(TLS),SNMP,Modbus TCP,RESTful,ASCII
  • GCL to perform basic logic control rules
  • Peer-to-Peer function to map I/O status
  • Watchdog timer to recover the system
  • Isolation protection: 2000VDC
Certifications CE CE CE CE CE CE CE

(Impuestos NO incluidos)
Agregar al Carrito Comprar

Especificaciones Detalladas

Analog Input

  • Channels 6
  • lnput Type V, mA
  • Input Range ±10 V, 0~20 mA, 4~20 mA
  • Sampling Rates(S/s) 10 S/s (sum)
  • Resolution(Bits) 16-bit

Analog Output

  • Channels 2
  • Resolution 12-bit
  • Output Ranges 0~10 V, 0~20 mA, 4~20 mA
  • Output Type V, mA

General

  • Protocol Modbus/TCP, TCP/IP, UDP, HTTP, DHCP, MQTT, SNMP, ASCII command
  • Connectors 1 x RJ45, 1 x 13-pin plug-in screw terminal, 1 x 9-pin plug-in screw terminal

Communications

  • Interface Ethernet

Isolated Digital Input

  • Channels 2
  • Input Voltage Dry Contact Logic level 0: close to GND Logic level 1: open Wet Contact Logic level 1: 10~30 VDC Logic level 0: 0~3 VDC

Environment

  • Operating Temperature -40~70 °C (-40~158 °F)
  • Isolation Voltage 2,000 VDC

Isolated Digital Output

  • Channels 2
  • Output Type Sink
  • Output Voltage 0~40 VDC
  • Sink Current 100 mA max./channel

Power Requirements

  • Input Voltage 10~30 VDC